home      

      products     

   fms aircraft  

     backyard    

      support     

       contact      

   using FMS  

   using BEXL  

    links & DL   

       FAQ      

     projects    

  online SHOP 

New!  BuddyBox Editions Adapter

Run the interface using power from the AC adapter/charger. No batteries needed! You can fly until your thumbs fall off! Save you TX Batteries for field flying.

 

 		 BuddyBox Edition Interface Adapter

If you have one of the non-powered interfaces, an adapter is available to provide power to the transmitter via the TX charger or an AC adapter (the adapter has a power connector at the circuit box).

Futaba FM (DIN6) - Type BEA3 Airtronics Standard (DIN5) - Type BEA2
 
for use with Type 3, X3, and U3 interface cables
 
for use with Type 2, X2, and U2 interface cables
  AC Adapter for BuddyBox Edition Interface Cable / Adapter

Although most existing transmitter chargers may work with the BuddyBox Edition Cable, others may not due to excessive noise (the power regulation circuit in the BuddyBox Edition cable/adapter should filter out most noise). For jitter free operation of FMS, a regulated, low noise, ac adapter is recommended. The power connection is a 2.5mm.

Regulated, Low Noise AC Adapter

 
  Futaba 9C/6EXA/Tower 4TH Adapter
 
This adapter is to be used with the PIC-Serial or USB Futaba FM interface (X3 or U3) and allow connection to the Futaba 9C, 6EXA, 4YF, and the new Tower Hobbies 4TH (which uses the mini Square6 connector).


Futaba FM to 9C
new!

 
 

Combo Pack Adapter (Universal Connect, PIC-Serial or USB only)

The Combo Pack includes four adapters to be used with the PIC-Serial or USB Futaba FM interface (X3 or U3). Please note these adapter will not provide power to your transmitter if used with the Power Edition versions. This will allow using the interface with most transmitters available! Perfect for a club or if you have different brand transmitters.
 

to Futaba AM (DIN5) to Airtronics (DIN5) to JR (mini 3.5)
 		 to 9C (square 6)
new!